Msc in Logistics and Transport Management.

Outside of many Swedish households today, you will find a typical green wastecontainer. This container has not changed since its introduction, despitecomplaints about foul-smelling and its impractical system. Even if the system usedtoday, still is the most optimal choice, there is a lot of newly developedalternatives out there.Its purpose is to get a broader perspective on how a waste management systemcan be developed into a working, land efficiently and aesthetically pleasing systemof humans and the environment in a small residential area.The authors treat the residential area of Jära, Ekhagen, in Jönköping, which ismanaged by JM AB as a problem area in regards to waste management.The issues raised by the authors are the different waste management systems usedin the corresponding areas of the world, how to apply technical andenvironmental as well as the waste management facilities from financial aspects.In the process, the methods used were literature reviews, case studies and aninterview. The case study was done through a modeling of waste managementsystems in the area Jära and an interview was conducted with the company Envacworking with vacuum systems. Studies have been made by different systems n theareas around the world.The results show that using directives and guidance will reduce the environmentalimpact done without replacing the traditional system.

Road design with focus to safety has been extensively developed in last decades in Nordic and some other EU countries with the main aim to achieve a decrease in a number of accidents and fatalities on the roads. These countries gained many valuable experiences, but they had to sacrifice great effort, expenses, and time to reach the present art-of-state. The purpose of the Master?s Thesis is to review some design approaches with focus to safety and discuss the general way that they may be applied. The Master?s Thesis studies safety in three levels: (i) general - design standards, national safety policies and road hierarchy; (ii) local authority and road administrator; and (iii) three specific safety countermeasures - junctions, pedestrian crossings and traffic calming.

This thesis is an evaluation of the new traffic solution at ?Skvallertorget?. The innovative theory behind it is to increase traffic-safety by introducing insecurity feelings for road-users. The conclusion of the evaluation is that the newtraffic solution is well adjusted according to guidelines for municipal traffic planning. The evaluation also illustrates the conflict between traffic planners deliberate attempt to avoid clear information and the road users wish to get it.

The purose of the study is to increase knowledge regarding systematic enviromentarl work in an organization that works with road services. Work on the road is done in a hazardous environment with constant danger regarding the life of the individual. The site of the work varies in accordance with where the needs ae . This requires skilled workers capable of working independently and that they are experienced din doing their own risk assessments in accordance with the individual believes that the situation calls for work to be performed safely. The study was conducted with a qualitative research approach in which four employees of different positions, knowledge, experience and vision to work in a hazardous environment were interviewed. The focus rests on the organization, management, and individual aspirations for a safe and secure working environment. The study adds weight to the relationship between the purchaser of the work and the organization as a prime contractor due to the compexity of the organization.

During its lifetime, a road goes through a number of different stages; pre-study,inquiry of the road, work plan, documenting stage, building stage and operatingstage. The operating stage is the one that takes the longest time and costs themost. Those have a tendency of becoming unnecessarily high because the projectengineers don?t always take the management and maintenance prerequisites intoconditions.To decrease the management and maintenance costs, the Swedish RoadAdministration SouthEast has been in need of a work procedure that makes theroaddesign engineers take the management and maintenance of the road intoconsideration. This shall be achieved by a checklist where the most commondesigns that lead to increased management- and maintenance costs are compiledand listed.Through interviews with project leaders in management, the most commonproblems have been identified, analyzed and summarized under the headlineswinter-road, vegetation, road equipment and road designs.To elucidate the problem from several points of view, interviews wereimplemented with project leaders in investment and roaddesign engineers.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

The safety and safety work on OKG, Oskarshamns Kraftgrupp, is supervised by SKI, Swedish nuclear power inspectorate. The task of SKI is to inspect that the nuclear power plants of Sweden runs in a safe way. The proprietor of the permit who runs nuclear power plants has the responsibility to maintain the required safety to run a plant. SKI publishes a number of statue books that OKG has to meet to be able to run the plants. SKI recommends in SKIFS 2 004:1, that OKG work with the safety requirements of IAEA.

In 1997, the Swedish parliament adopted a decision on Vision Zero (nollvision) in the road and transport system. Vision Zero means that no one should be killed or seriously injured in traffic accidents in the road transport system (Prop. 2003/04: 160). For the Transport Administration in Sweden (Trafikverket), this means increased demands on security and signage at road work sites around the country. This in turn means increased demands on the contractors that carry out road work for the Transport Administration.

The interaction between the driver, the car and the road is essential for the road safety. This case study focuses on the road condition and its effect regarding road safety issues. By studying and isolating the road condition aspect and its contributing role to the accident occurrence, the aim is to explore their relationship, as well as highlight the road parameters that are commonly associated with accident occurrence. This result will be used to develop and increase awareness of the impact of poor road alignment and poor road surface conditions on traffic safety, in order to prevent these accidents from occurring. The road parameters chosen for this study include side friction, cross slope and rut bottom cross slope, road texture, curvature, drainage gradient and rutting.The case study was limited to lv 360 in Va?sterbotten, where all accidents with an unclear cause of the accident were studied, between 2003 and 2012 were carefully studied and assessed based on the condition of the road at the time of the accident.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

The purpose of the present study was to examine effects of driver, vehicle, and environment characteristics on Collision Warning System (CWS) design. One hypothesis was made that the capability of collision avoidance would not be same among a driver, vehicle, and environment group with different characteristics. Accident analysis and quantitative analysis was used to examine this hypothesis in terms of ?risk? and ?safety margin? respectively. Rear-end collision had a stronger focus in the present study.

In 1997, the Swedish parliament adopted a decision on Vision Zero (nollvision) in the road and transport system. Vision Zero means that no one should be killed or seriously injured in traffic accidents in the road transport system (Prop. 2003/04: 160). For the Transport Administration in Sweden (Trafikverket), this means increased demands on security and signage at road work sites around the country. This in turn means increased demands on the contractors that carry out road work for the Transport Administration.